100 Series Pin & Barrel Type Continuous Aluminum Hinges

Continuous hinges shall be full height piano-type hinge providing full height door support.

• Supports weights up to 600 lbs. 4'0" maximum door width
• Material to be extruded aluminum 6063 -T6 alloy
• .25 diameter 304 stainless pin must be teflon coated
• Each knuckle 2", including split nylon bearing at each separation for a quiet, smooth, self-lubricating operation
• Finish: anodized finish (anodized clear, black, dark bronze, light bronze). Other finishes upon request.
• Hinge pin cap
• Non-handed
• All hinges shall be furnished with manufacturer's recommended hardware pack per specific model application
• Exterior barrel diameter .515 (1/2 inch)
• Material thickness less than .125 inches
• Material weight will be no less than 1.5 lbs. per foot
• Hinges shall meet ANSI/BHMA Standard A156.26 Grade 2
• Symmetrically templated hole pattern


Note: 10 Year Warranty on all Continuous Hinges