| Special Length | |
| For hinges 40" to 83 1/8" in length | |
| For hinges 83 3/16" to 95" in length | |
| For hinges 95 1/16" to 118 3/4" in length | |
| For hinges 118 13/16" to 192" in length | |
| Raised Barrel (Swaged) Available on all edge mount and half surface models Required on models FS-201, FS-202, FS-301 & FS-302 in order to open 180° Suffix hinge "- RB" For cased open or center pivot doors |
 |
| Hospital Tip Available on all models except spring-loaded toilet partition hinges Suffix hinge "- HT" Helps provide a safe, clean environment |
 |
Standard Edge Guard Cut-Outs
|
 |
||||||
| Dutch Door Prep Available on all hinge models Suffix hinge "- DD" Continuous frame leaf with two-piece door leaf Indicate handing, clearances, door and frame heights, and materials when ordering |
 |
| Security Studs Stainless steel security studs mounted to the frame leaf Door leaf is drilled to accommodate studs Three studs installed on hinges up to 7'2" Four studs installed on hinges over 7'2" Door and frame must be specially prepared to accommodate security studs |
 |
| Wide Throw Only available on 300 series hinges Suffix hinge "- WT" Specify distance from pin centerline to heel edge of hinge when ordering |
 |
| Sheared Leaf Used for narrow door thickness, unevenly rabbeted frames or other special applications Specify distance from pin centerline to heel edge of hinge when ordering |
 |
| Reinforcement may be required on extreme wide throw applications. These conditions will be determined through a drawing approval process. Cost will be determined at time of approval |
 |
| Custom Hole Pattern Any hole shape or pattern other than Markar's standard templated hole pattern Indicate desired pattern and include dimensioned diagrams when ordering |
 |
| Security Fastener Spanner head and Torx Head security fasteners are available in lieu of standard fasteners. |
 |
| Blank Holes omitted for special applications, such as welded installation |
 |
| Lead Lined Cover Only available on surface mounted Hinges. Suffix hinge "- LL" Used for x-ray room doors and Other locations where radiation leakage could be a problem |
 |